Product Name: Car Beauty and Cleaning Car Wash Accessories
Material: High Density Polyethylene
Features:
- The electric foam sprayer can easily turn the water and detergent in the bottle into foam, and the rich and dense car wash foam can gently remove abrasive dirt particles without damaging the paint.
- Enhance your cleaning experience with an electric car foam foaming device with 3mm fan shaped nozzle. This professional design can achieve accurate foam dispersion, and the spraying angle can reach 75 °, ensuring full coverage and optimal cleaning efficiency.
- The electric foam spraying machine is equipped with a spacious 1.5 liter liquid storage tank. The bottle body is also a clear visibility of the contents in the semi permeable state, allowing you to easily monitor the remaining detergent and water level.
- The electric soaking machine is made of high density polyethylene, which has durability and elasticity. The bottle body has pressure resistance and explosion proof functions, capable of withstanding pressures up to 8 bar, thereby improving safety and service life.- The electric foam spraying machine with two 1300mAh lithium battery batteries can start the motor by pressing the switch. Within a few seconds, it will stabilize at a pressure of approximately 2 bar, freeing you from manual pressurization and simplifying the cleaning process.
The charging indicator light is red. When the indicator light turns green, it indicates that the charging is complete.
Equipped with powerful electric motor, one click spraying, long-lasting battery life, and can spray for 20 - 30 minutes on full charge.
The lid, which contains motors and other electronic components, should not be immersed in water for cleaning. Towel that has been wrung out of moisture can be used to scrub the surface of the lid.
If you need to use the device in a gentle breeze, please spray it downwind and keep the sprayed liquid as far away from you as possible.
At the beginning of startup, the pressurization may be delayed for a few seconds, and the nozzle may drip liquid. After a few seconds, a normal spray will appear.
After use, the residual pressure inside the bottle should be released, the container should be emptied, and carefully cleaned and rinsed with clean water. Invert and stand upright, drain the water.
Instructions:
- Step 1: Install the nozzle onto the nozzle of the pot lid..
- Step 2: Pour clean water and solvent into pot in proportion.
- Step 3: Tighten the lid and shake the pot up and down to mix the liquid evenly.
- Step 4: Pick up the handle of the pot, aim it at the cleaning object, press the lever, and after a few seconds, it will spray normally.
- Step 5: After the spraying is completed, release the lever and the spraying is over.
- Step 6: Press the pressure relief valve to release the residual pressure inside the pot.
- Step 7: At the end of the work, unscrew the lid of the pot, pour out the remaining liquid, and clean it.
Place of Application: Family, Garden
Note:
- Do not spray highly corrosive, flammable, and explosive liquids.
- Open the lid of the pot after the pressure is released.
- Do not exceed the maximum capacity of the solution to avoid liquid leakage.
Package Including:
1 x Electric Sprayer
1 x Charging Line
1 x Spray Nozzle
1 x Instructions
The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.
