Square Filter Holder 100mm Filter Holder Mark III Natural CPL Included Adapter Ring Sold Separately Magnet Type H&Y K-Series + Drop-in KH3-B

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.

[About clocks that synchronize time via radio waves] The function of clocks that synchronize time via radio waves only works in the Japanese area. Please be careful. [H&Y 100mm Filter Holder Mark III + CPL Set] Kit Contents / 100mm K Series Filter Holder Mark III, Drop-in Natural CPL, Filter Holder Pouch *Holder adapter and square filter are sold separately. The included CPL filter is a natural CPL with almost no unnecessary color fog, faithful color reproduction, and low reflectance. [Advanced Points in MarkIII] In MarkII, the adapter ring was attached to the filter holder by dropping it onto the back of the holder and tightening it with a lock screw, but now it can be attached with a single touch using a magnet and has a sliding lock, ensuring even faster setting and safety. [Patented magnetic frame + drop-in holder] The square filter can be attached and detached using a magnet. Filters that require a rotating frame, such as CPL filters, are drop-in type, and the effect can be adjusted by operating the dial on the filter frame. It can be put on and taken off and adjusted in the shortest possible time even when wearing gloves in the dark or cold, and it is easy to layer. Realizes the most comfortable filter work ever. [Compatible with a wide range of lenses] The optional adapter ring is a magnetic type that can be connected to the holder with one touch, and is compatible with filter diameters of 49 mm to 95 mm. *It is shared with the magnetic adapter [RM-AR] for the REVORING Swift system. *Adapters for ultra-wide-angle lenses from various manufacturers will be released soon. [A wide variety of filters] In addition to H&Y's 100x100mm and 100x150mm square filters with magnetic frames, we also have a wide variety of dedicated drop-in filters, including the classic CPL, CPL+ND, ND, and Night filters, as well as soft, cross, and streak types. 100mm K-Series Filter Holder Mark III Holder + Drop-in Natural CPL Filter This product only includes the holder, drop-in natural CPL, and special pouch, and the adapter ring is sold separately. The third generation model of the well-established K series 100mm square filter holder. The biggest difference from conventional products is that the adapter ring can be attached to the filter holder by dropping it onto the back of the holder and tightening it with a lock screw in the MarkII, but with the MarkIII it can be attached with a single touch using a magnet and has a sliding lock, allowing for even faster setup. *The adapter ring uses the magnetic adapter (thin frame adapter for wide-angle lenses) [RM-AR] for the H&Y REVORING Swift system. The connection between the filter holder and the adapter ring is a sliding two-point locking mechanism, and the magnetic square filter has a locking screw that is used on Mark II holders and later. The square filter has been improved so that it will not come off even if there is an impact from behind. PL filter is a proven rear drop-in filter. It is a type. In addition, in the previous model, the separately sold holder cap was only compatible with the magnetic holder cap [LC100] that attaches to the filter holder, but the magnetic cap [LC-82F] (common to all adapter ring [RM-AR] sizes) that can be attached directly to the adapter ring with the holder removed can also be used. While maintaining the lightweight magnetic setting, you can secure the filter in situations where you don't want to drop it, such as when it falls off unexpectedly or near a river, reducing the risk of loss and increasing protection while carrying it. This is a comprehensively evolved H&Y product that is faster and safer. ・H&Y's patented magnetic holder ・Magnetic system allows for quick filter attachment/detachment and position adjustment ・H&Y's patented drop-in CPL filter system can be used ・H&Y's 100x100mm and 100x150mm filters with magnetic frames can be installed (H&Y's magnetic frames are supplied by Marumikoki and Laowa brand products can also be installed) ・Adapter rings are sold separately. Magnetic for REVORING Swift system Use the adapter (thin frame adapter for wide-angle lenses) [RM-AR]. - Filters from other companies such as Lee, Nisi, Formatt Hitech, Kani etc. can be used as long as they are 2mm thick by using a magnetic frame (sold separately) - Made of high quality aluminum material