Elecom Compatible Switching Hub 2 (Summary) 100BASE-TX EHC-F05PA-B (x Sets)

We offer a wide variety of products, and the following precautions apply to some of them. Please note that they are listed for all products. 【Voltage Compatibility】Designed for Japanese voltage (90-110V). Using with a different voltage may cause malfunction. 【Plug Type】Japanese plugs (A or B type). Use a conversion adapter if needed. 【Transformers & Adapters】Transformers adjust voltage; adapters only change plug shape. Using an adapter without a transformer may damage the product. 【Liability】We are not responsible for damages caused by improper use, such as using the product without a transformer. A plastic housing 5-port hub with AC adapter power supply compatible with 100BASE-TX. It is an eco-power saving type that complies with the Energy Saving Act and also has a loop detection function. This is a highly reliable switching hub that does not use electrolytic capacitors on the main board and has a long-life design. A plastic housing 5-port hub with AC adapter power supply compatible with 100BASE-TX. This is an eco-power saving type that complies with the Energy Saving Law. No electrolytic capacitors are used on the main board. This makes it a highly reliable switching hub with a long-life design. Equipped with loop detection function. A blinking LED lamp notifies you of the occurrence of a network loop and prompts you to resolve the network problem. The AC adapter comes with tracking measures. Even when installed for a long time, tracking phenomenon due to dust is prevented. The compact design allows you to install it anywhere. There is a hole on the back of the main unit for wall mounting, so it can also be mounted on a wall. ●Connection method: 10 0BASE-TX/10BASE-T●Network type: IEEE802.3u/IEEE802.3●Switching method: Store & Forward●Buffer memory: 48Kbytes (dynamically allocated to each port)●Flow control control: IEEE802.3x (at full duplex), back pressure (at half duplex)●Switch fabric: 1. 0Gbps●Maximum packet transfer capacity: 0.7Mpps●Filtering speed: 148800 packets/sec (100Mbps), 14880 packets/sec (10Mbps)●Number of MAC address registrations: 2,048 (total of all ports)●Number of ports: 5 ports●AutoMDI/MDI-X: Supported●Auto negotiation: Supported (100/10Mbps)●Connector shape: RJ-45 ×5 ● Compatible cables: 10BASE-T: UTP category 3 or higher, 100BASE-TX: UTP category 5 or higher ● Non-blocking: Supported ● Jumbo frame: Supported (2Kb ytes) ●Loop detection function: Loop detection ●MTBF: 1,752,000 hours ●EAP transmission function: Supported ●BPDU transmission function: Supported ●Input voltage: AC100 to 240V ± 10% 50/60Hz ●Power consumption (rated): Max. 1.3W ●Heat generation: Max. 4.7kJ/h ●Power saving function: Easy power saving E (IEEE 802.3az) Compatible ●Energy consumption efficiency: 2.6W/Gbps ●Maximum effective transmission speed: 0.5Gbps ●External dimensions (width x depth x height): Approx. 90.4 x approx. 84.5 x approx. 34.0mm (body only) ●Mass: approx. 105g ●Housing material (color): Plastic (black) ●Environmental conditions during operation: Temperature: 0°C to 40°C Humidity: 10% to 90% (no condensation) ●Environmental conditions during storage: Temperature: -40℃ to 70℃ Humidity: 5% to 90% (no condensation) ●Installation direction: horizontal installation, wall hanging ●Hole for wall mounting: Available ●Warranty period: 1 year ●Legal compliance: RoHS compliant ●Compliant standards: VCCI ClassB ●Accessories: Dedicated AC adapter (approx. 5m): 1 piece, For safe use: 1 piece *Rubber feet are attached to the product body at the time of shipment. A plastic housing 5-port hub with AC adapter power supply compatible with 100BASE-TX. It is an eco-power saving type that complies with the Energy Saving Act and also has a loop detection function. This is a highly reliable switching hub that does not use electrolytic capacitors on the main board and has a long-life design. A plastic housing 5-port hub with AC adapter power supply compatible with 100BASE-TX. This is an eco-power saving type that complies with the Energy Saving Law. No electrolytic capacitors are used on the main board. This makes it a highly reliable switching hub with a long-life design. Equipped with loop detection function. A blinking LED lamp notifies you of the occurrence of a network loop and prompts you to resolve the network problem. The AC adapter comes with tracking measures. Even when installed for a long time, tracking phenomenon due to dust is prevented. The compact design allows you to install it anywhere. There is a hole on the back of the main unit for wall mounting, so it can also be mounted on a wall. ●Connection method: 100BASE-TX/10BASE-T ●Network type: IEEE802.3u/IEEE802.3 ●Switching method: Store & Forward ●Buffer memory: 48Kbytes (Each port