Product Feature
Dual fast charging motorcycle USB charger - The upgraded motorcycle mobile phone charger is equipped with 36W USB-C (PD power supply) and 18W USB-A (Quick Charge 3.0) dual ports. (Use alone).
Quick installation - Two installation methods, handlebar installation and rearview mirror installation, can meet the installation and use of most models on the market. (Handlebar installation is suitable for handlebars with a diameter of 1.9-2.2cm / 0.75-0.87 inches).
LED voltmeter, you will understand the health of the battery while driving. Automatically monitor the battery and electrical system, and indicate the voltage on the screen to avoid power consumption and easy to use. (Tip: Please replace the battery as soon as possible if the voltage is lower than 12V).
Safe and reliable - Made of high-grade ABS material, it is scratch-resistant. Smart IC technology maximizes charging efficiency. The 2-port USB C+A motorcycle mobile phone charger has undergone strict control tests to ensure safe charging and provides a powerful protection system to prevent short circuit, overheating, overcurrent and overcharging.
Support multiple output fast charging protocols: PD2.0/PD3.0 (PPS) output protocol; BC1.2 and Apple protocol; Qualcomm QC2.0 and QC3.0; Huawei fast charging protocol FCP; Huawei fast charging protocol SCP; Samsung fast charging protocol AFC; Spreadtrum fast charging protocol SFCP.
Independent small switch - The product comes with an independent small switch. After connecting to the power, the product will be powered on when the waterproof cover is opened. Closing the waterproof cover will directly touch the switch and turn off the power. Even if it is connected to the car battery, it will not waste the battery power.
Product Specification
Type：Dual fast A+C charger
Model: CS-2100A1
Net weight: 90G
Gross weight: 119G
Size: 8.1*8.1*11.6CM
Wire length: 149CM
Material: ABS
Monitorable voltage range: DC 5-30V
Rated voltage: DC 12V-24V
Waterproof grade: IPX4
Installation method: handlebar installation/rearview mirror installation
Purpose: can be used to power most vehicle-mounted products such as mobile phones, tablets, IPADs, navigation and GPS
Scope of use: can be installed on DC12-24V motorcycles, beach cars, tricycles and other means of transportation
Wiring instructions: red wire connects to the positive pole , of the battery, black wire connects to the negative pole - of the battery
Output voltage and current:
USB: 5V/3A, 9V/2A, 12V/1.5A
Type-C: 5V/3A, 9V/3.5A, 12V/3A
USB+ Type-C: 5V/1.7A+5V/1.7A
1. Output interface type: USB+ Type-C
When using two ports, you can use fast charging output by using any one of the USB ports.
2. When using two ports at the same time, both ports output 5V, the maximum output of a single port is 5V/3A, the total power of the two ports is 5V/3.4A, and the two channels are individually current limited.
Package Included
1x Dual fast A+C charger
The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.
