1. Widely used in the inspection of storage and transportation processes of food, medicine, chemical products, etc.
2. After the record is completed, you can directly enter the computer to obtain the PDF report.
3. Built-in USB connector, directly connect to PC or mobile phone, no cable or card reader required.
4. With ±0.5℃ high accuracy and high sensitivity.
5. Small size, compact structure, easy to carry.
6. Provides a variety of temperature measurement options and can store 10,000 data points.
Product Description:
Item Condition: 100% Brand New
Brand: Yiliyi
Item Type: Temperature Recorder
Material: Plastic
Color: As shown in the picture
Size: Approx. 67x28 mm/2.64x1.1 in (L x W)
Weight: Approx. 13 g/0.5 oz
Type: Disposable
Recording Interval: 10 minutes
Accuracy: ±0.5℃(-20℃～+40℃)
Range: ±1℃
Data Capacity: 10,000 records
Alarm Temperature Range: <2℃ or >8℃ (<35.6℉ or >46.4℃)
Start Delay: 30 minutes
Working Environment Temperature: -30℃~+60℃
How to Use:
1. Press and hold the "Start/Stop" button for more than 3 seconds, and the "OK" indicator lights up for 3 seconds, indicating that the device starts recording. At this time, you can place the device in the environment you want to control.
2. During recording, the device will automatically light up every 10 seconds. If the normal backlight (green light) lights up every 10 seconds, it means that the device will not overheat during recording. If the alarm light (such as red light) lights up every 10 seconds, it means that the temperature is too high during recording. Note: If overheating is detected during recording, the green light will no longer light up.
3. Press and hold the Start/Stop button for more than 3 seconds. The alarm indicator (such as red light) will light up for 3 seconds, indicating that the device will stop recording. When the device is full, the recording will stop automatically. After the device stops recording, it will not flash automatically. If the device overheats during recording, press the Start/Stop button. If the normal indicator (green light) is on, it means that the temperature is not covered during recording; if there is an alarm when the indicator (such as red light) is on, it means that the temperature is too high during recording.
4. Take out the waterproof packaging bag and plug the device into the USB port of the computer. During the PDF file creation process, the normal indicator (such as green light) and the alarm light (such as red light) will light up. After the file is created, the normal indicator light (such as green light) will light up. It will stay on until the recorder is removed from the computer.
Notice:
1. Please accept the error of 1-2 cm. Due to manual measurement, thank you for your understanding
2. Monitor calibration is different, the color of the product shown in the photo may be slightly different from the actual product. Please choose the actual standard.
3. Do not disassemble the package. Before testing, turn on the device, press the start button, the light will be on for 10 seconds indicating that the product is good, and start recording after turning on the power for 30 minutes. (Do not press the stop button and do not connect to the computer, press the stop button (if you do not want to save, do not press the stop button) and connect to the computer, this product will not be used again after one use.
Record data
