DRAW A LINE 002 Tension Rod B Black (D-B-BK) - Vertical and Horizontal Mounting, 115-190cm Wide, 15-2.5kg Load Capacity

[Brand Concept] DRAW A LINE A new life begins with a single line. Just by drawing a line, you can color your everyday scenery with your own unique style. Just by drawing a line, new possibilities begin to expand endlessly. DRAW A LINE is the signal for the beginning of a richer life.

[Product Information] This is a DRAW A LINE tension rod that can be installed vertically or horizontally. By combining it with accessories designed for vertical or horizontal installation, you can use it in a variety of situations to suit your individual lifestyle. *When installing vertically, use the large round cap. *When installing a lamp, only install the lamp designated for this product.

[Product Dimensions] Width: 115-190cm x Depth: 7cm x Height: 7cm Pipe: Diameter 25.4mm, 22.2mm Grip: Diameter 34mm

[Working Weight] [Horizontal Mounting] Large Round Cap: 15-5kg / Small Round Cap: 10-2.5kg [Vertical Mounting] Large Round Cap: 10kg *The load capacity may decrease depending on insufficient crimping force, the mounting width, the mounting surface material, and the installation condition. *The displayed load capacity is an experimental value and is not guaranteed.

[Installation Location] <For Horizontal Mounting> - A sufficiently strong surface such as a concrete wall or pillar. - A surface with a slatted base such as plasterboard or plywood. <For Vertical Mounting> - A sturdy surface with a slatted base such as concrete, plasterboard, or plywood. *The load capacity will decrease when mounting on a board or plywood. For more stable installation, use staples on boards and wood screws on plywood. However, installation marks will remain, so please use in a location that does not interfere with installation.

[About the Product's Appearance] ● The brass parts are unplated and remain their natural color. The color will change with use. ● The steel has a matte finish for a unique texture. It may be scratched if it comes into contact with the sharp edges of hard objects. ● When installing, the pipe is penetrated by the screws, creating holes in the pipe.

Enjoy the aging of the material as you use it.

[Pre-Installation Precautions] ● This product is for indoor use only. Do not use for any other purpose. ● The installation requires strong tension on the installation surface, so installation marks may remain. ● When installing using screws/staples, staple/screw holes will remain on the installation surface, so use in a location that does not interfere with installation. ● Do not use in high temperatures, outdoors, in direct sunlight, bathrooms, high humidity areas, or where water may splash. ●As a precaution, do not install near valuables, hazardous items, or items that may be damaged, or above combustion appliances, heat-generating appliances, water faucets, or areas where people are constantly present. ● Install perpendicular to the installation surface. ● Do not disassemble or modify as this is dangerous. ● Install within the indicated installation range. ● Use the large round cap when installing vertically. ● Tighten the brass drill screws securely. Insufficient tightening may cause the pole to fall or tip over. ● Check the condition after installation.

[Precautions for Use] ● Do not use as a handrail or guard for personal protection or for purposes other than its intended use. ● Sudden loads, strong pulling, shaking, or hanging from the pole may cause it to fall or result in injury. ● As a precaution, do not place, hang, or place hazardous items, valuables, or items that may be damaged on or near the pole. ● Use within the indicated load capacity. The load capacity is an experimental value and is not guaranteed. ●Check the crimping condition 2-3 days after installation, and increase the crimping force if it is weak. ●Please note that the surface paint may be damaged during use. ●Due to the characteristics of resin parts, they will deteriorate due to oil adhesion and ultraviolet rays. ●Regularly inspect the product for deformation, damage, cracks, etc. during use. If any abnormalities are found, discontinue use immediately. ●Wipe off dirt with a mild detergent diluted with water, wiping to remove any detergent residue, then wipe with a dry cloth. Scrubbing with a scrubbing brush or abrasive powder will cause scratches. ●There may be anti-rust oil on the pipe. Wipe it off before use. ●Deodorizers, air fresheners, cosmetics, hair styling products, acidic detergents, alkaline detergents, oils and grease, and organic solvents (such as benzene or thinner) may cause deterioration. If any dirt is found on the product, remove it immediately. ●We do not provide compensation for breakdowns, damage, or accidents caused by acts of God such as natural disasters, modifications, deterioration over time, or use that deviates from the product's intended purpose. DRAW A LINE is a product that combines the base item, a "Rod (a single line)," with accessories. You can freely combine them to easily create your own unique interior. Combine accessories and enjoy a variety of uses, such as hanging, placing, and displaying. The matte steel material and brass parts create a high-quality interior. This pole can be installed both vertically and horizontally, serving as a base for customizing your storage. It is fixed by tension, so it can be installed flexibly and will not damage the wall. This type has a longer installation width than Tension Rod A. Mounting Size: 115-190cm (Vertical/Horizontal Mounting) Weight Capacity: [Horizontal Mounting] Large Round Cap: 15-5kg / Small Round Cap: 10-2.5kg [Vertical Mounting] Large Round Cap: 10kg Color: Black Set Contents: 1 unit (with 2 large round caps), 8 screws, 1 stapler, 2 small round caps, 1 brass drill screw, instruction manual