The products are shipped ready for installation with high quality double-sided acrylic tape on the back. To make the adhesion more durable, reinforcement transparent silicone can be applied, especially during winter months. Install in a dry and dust-free environment. The cleanliness of the application floor is very important for installation. After removing the product from its packaging, practice the installation in the area where it will be applied without removing the protective surface of the double-sided tape. Thoroughly clean the surface on which the product will be adhered with a cleaning liquid (alcohol, rubbing alcohol, cellulosic thinner, etc.). (Cleaning with liquids containing additives such as perfumed cologne, wet wipes, gasoline, etc. is not recommended.) In order for the double-sided tape on the back of the product to show its full properties, the ambient temperature must be above 25C. After removing the protective surface of the tape, use a hair dryer etc. to increase the adhesion strength. Apply heat to the band using After removing the protective surface of the tape on the back of the product and applying heat, apply the product to the cleaned area at once. Make sure it adheres strongly by applying pressure with a dry cloth. After the installation is completed, apply paper tapes on the vehicle to put pressure on the chrome and leave it for 24 hours, then remove the paper tapes. In order for the product to adhere firmly, protect it from water for 24 hours and be careful not to wash your vehicle with pressurized water for 48 hours. WE ARE WAITING FOR YOUR POSITIVE COMMENTS TO SUPPORT OUR STORE. HOPE TO SEE YOU AGAIN. WE WISH YOU HEALTHY DAYS . SEDA DZAYN OTO AKSESUAR SAN.TC.LTD.T